Eriksen - Profibus-DP absolute encoder

Shanghai Zhejun Automation Equipment Co., Ltd.

Cooperative Supplier 3 Years

Multi-turn single-turn absolute encoder Industrial automation application Multiple apertures available

USD 229-1070

output value: Monthly Output1000

contact shop

Profibus-DP absolute encoder

Product Parameters

Mechanical parameters		Electrical parameters
Maximum speed	6000 rpm	Operating Voltage	10-30Vdc (5Vdc can be customized)
Spindle load	Axial force 40N, radial force 100N	Current consumption	<50mA (24Vdc) no load
Spindle material	Stainless steel	Output signal	PROFIBUS Industrial Bus
Shell material	Aluminum	Start Time	<1s
Shock resistance	1000m/s²(6ms), equal to 100g	Reverse polarity protection	Have
Vibration resistance	200m/s² (10-2000Hz), equal to 20g	Short circuit protection	Have
Allowable axial movement	±1.5mm	Repeatability	Less than 2 bits
Allowable radial runout	±0.2mm	IP Rating	IP65/IP67
External structure	60mm outer diameter, solid shaft, blind hole shaft	Operating temperature	-40°C~85°C
Connection Type	Side outlet M16 waterproof connector	Storage temperature	-40°C~85°C
Flange material	Aluminum	Temperature	98% relative humidity, non-condensing
Shaft material	Stainless steel

Encoder Introduction		Interface Introduction
Encoder Technology	Magnetoelectric	Output signal	PROFIBUS
Single turn resolution	12, 13, 14 digits optional	Manual function	Address selection switch 0-99 and terminal resistor DIP switch (with terminal box)
Multiple laps	64 laps, 256 laps, 4096 laps, 16384 laps optional	Interface cycle time	≥2ms
Multi-turn technology	Mechanical gear set	Transmission rate	<12M
Code	Binary	Programming functions	Single-turn resolution, signal counting direction, baud rate, preset (zero point)
		Output Driver	Profibus data interface, optical coupler isolation

Mechanical Dimensions

Company：Shanghai Zhejun Automation Equipment Co., Ltd.

Email：zeutech@ttbridge.com

Tel：0086

Home