Eriksen - 100-200mm Engineering Rubber Tracks

EasyTrack Solutions

Cooperative Supplier 11 Years

100-200mm Engineering Rubber Tracks

Tracks for small engineering vehicles, tracks compatible with mini loaders

Track Width：100mm, 130mm, 150mm, 180mm, 190mm, 200mm
Track Pitch：60mm, 72mm
Customized Teeth No.： 25teeth ~ 100teeth

USD 50-60

contact shop

Product Parameters

Technical Parameters

Spec.&Type	Customized Teeth	Technical Parameters							Pattern	Pattern Images	Guide rail type
Spec.&Type	Customized Teeth	A	B	C	D	E	F	H	Pattern	Pattern Images	Guide rail type
100x72	28~68	62	48	38	23	29	30	15	A1		A.B
130x72	28~60	64	50	38	23	28	28	15	A2		A.B
XD150x60	28	64	50	38	23	26.5	27	17	M3		A.B
150x60	26~66	64	51	39	28	23	23	15	B1		A.B
150x72	28~76	65	50	38	23	27	27.5	15	B2		A.B
180x60	25~58	64	48	38	24	28	26.5	14	B2		A.B
180x72	25~100	64	50	38	24	29	29	15	A3		C
Y180x72	28~52	58	46	34	23	18.5	17.5	16	D1		A.B
180x72K	31~52	62	53	37	21	22	19	16	D2		D
Y180x72K	32~52	62	53	37	21	22	19	16	C1		A
DB180x72	35~45	64	50	38	24	29	29	10	C2		C
HD180x72	39~45	64	50	38	24	29	22.5	10	K1		A.B
NMS180x72	38~45	64	50	38	23	29	28	28	H2		A.B
190x72	33~63	68	50	38	22	28.5	29	15	E1		A
200x72	27~82	65	50	38	24	27	25	17	A2		A
200x72K	32~56	68	52	40	22	30.5	29	15	-	-	D
C200x72	30~45	65	50	38	24	27	25	22	I3		A.B

Guide rail type

Product Details

High Tread Pattern Design

Strong grip, prevents slipping, performs

smoothly even in muddy conditions

Anti-cut Edge Design

Optimized anti-cut edge design reduces the

likelihood of track edge breakage

Closed Cord Structure

Internal reinforcement, prevents mud and

sand intrusion, extends service life

Caterpillar use the matters needing attention

1.Avoid quick starting or turning the machine on sharp edged or projected ground.

2.Keep the surface of rubber away from oil or grease. Wipe off immediately while it is oil stained.

3.Avoid corrosion between rubber tracks and other components of the machine, especially on its inner circumference.

4.Do not use heavily worn driving wheel because it may damage the iron teeth of the rubber track.

5.If the machine is unused for a long time, the rubber track should be dismantled and cleaned of mud and other useless materials and kept indoors from direct sunlight and raindrops.

6.As it is rubber-made products, the rubber track would work well under the temperature between -25℃—55℃. However, special rubber may meet the special needs of customers.

Attention Rubber Track Tension

1. Basically you have to apply the specified rubber track tension of the machine manufacture.

2. The following tolerance specified by the rubber track producer must be adhered.

For Rubber Track Width	Tolerance
180-250mm	10-20mm
260-300mm	20-25mm
320-400mm	25-30mm
420-500mm	30-35mm

Check the Rubber Track Tension

Practical approach:

1.Lift the machine off the floor (with the help of shied or bucket etc) so that the rubber track can sag freely.

2.Now measure the tolerance between the middle track roller and the rubber track. (Weekly Check!!!)

Application Cases

Designed for small construction machinery, with selectable pitches of 60/72mm and customizable tooth counts of 25-100. Suitable for small excavators, harvesters, and other equipment; wear-resistant and tear-resistant, protecting the ground and reducing noise.