Eriksen - 230mm Engineering Rubber Tracks

EasyTrack Solutions

Cooperative Supplier 11 Years

230mm Engineering Rubber Tracks

Tracks for medium-sized engineering vehicles, tracks compatible with earthmoving tracked loaders

Track Width：230mm
Track Pitch：48mm, 72mm, 96mm, 101mm
Customized Teeth No. ：29teeth ~ 94teeth

USD 100-120

contact shop

Product Parameters

Technical Parameters

Spec.&Type	Customized Teeth	Technical Parameters							Pattern	Pattern Images	Guide rail type
Spec.&Type	Customized Teeth	A	B	C	D	E	F	H	Pattern	Pattern Images	Guide rail type
S230x48	60~94	70	62	30	25	22	24	23	D1		C.E
230x48	60~90	72	66	32	24	25	25	24	D1		D
K230x48	64~86	68	60	30	24	20	19	18	G3		C.E
T230x48	60~90	73	65	29	25	22	23	22	D1		C.E
230x72	32~94	74	55	41	24	29.5	27	14	A2/A3		B
DB230x72	36~54	74	55	41	24	29.5	26	10	C2		D
MK230x72	37~45	66	51	41	23	31	30	19	D3		D
SK230x72	32~59	66	51	41	23	31	30	19	C3		D
V230x72	36~78	74	55	41	24	29.5	27	14	-	-	A.B
D230x72	46	74	55	41	24	29.5	26	18	A2		C.E
HMS230x72	43~56	74	55	41	24	29.5	26	30	M1		A.B
NMS230x72	43~56	74	55	41	24	29.5	26	25	M1		A.B
230x96	29~46	74	66	30	26	23	23	20	C1		D
230x101	30~40	78	66	32	26	23	23	22	E1		E

Guide rail type

Product Details

High Tread Pattern Design

Strong grip, prevents slipping, performs

smoothly even in muddy conditions

Anti-cut Edge Design

Optimized anti-cut edge design reduces the

likelihood of track edge breakage

Closed Cord Structure

Internal reinforcement, prevents mud and

sand intrusion, extends service life

Caterpillar use the matters needing attention

1.Avoid quick starting or turning the machine on sharp edged or projected ground.

2.Keep the surface of rubber away from oil or grease. Wipe off immediately while it is oil stained.

3.Avoid corrosion between rubber tracks and other components of the machine, especially on its inner circumference.

4.Do not use heavily worn driving wheel because it may damage the iron teeth of the rubber track.

5.If the machine is unused for a long time, the rubber track should be dismantled and cleaned of mud and other useless materials and kept indoors from direct sunlight and raindrops.

6.As it is rubber-made products, the rubber track would work well under the temperature between -25℃—55℃. However, special rubber may meet the special needs of customers.

Attention Rubber Track Tension

1. Basically you have to apply the specified rubber track tension of the machine manufacture.

2. The following tolerance specified by the rubber track producer must be adhered.

For Rubber Track Width	Tolerance
180-250mm	10-20mm
260-300mm	20-25mm
320-400mm	25-30mm
420-500mm	30-35mm

Check the Rubber Track Tension

Practical approach:

1.Lift the machine off the floor (with the help of shied or bucket etc) so that the rubber track can sag freely.

2.Now measure the tolerance between the middle track roller and the rubber track. (Weekly Check!!!)

Application Cases

Offers multiple pitch options of 48/72/96/101mm and customizable tooth counts of 29-94. Suitable for medium-sized excavators, drilling rigs, and other equipment; enhances traction and reduces ground damage.