Eriksen - 250mm Heavy-Duty Engineering Rubber Tracks

EasyTrack Solutions

Cooperative Supplier 11 Years

250mm Heavy-Duty Engineering Rubber Tracks

Suitable for medium-sized engineering equipment

Track Width：250mm
Track Pitch：47mm, 48mm, 48.5mm, 52.5mm, 55.5mm, 72mm, 96mm, 109mm
Customized Teeth No.：29teeth ~ 106teeth

USD 200-210

contact shop

Product Parameters

Technical Parameters

Spec.&Type	Customized Teeth	Technical Parameters							Pattern	Pattern Images	Guide rail type
Spec.&Type	Customized Teeth	A	B	C	D	E	F	H	Pattern	Pattern Images	Guide rail type
250x47	72~88	70	61	30	23	23	19	20	F2		E
250x48	72~100	70	62	34	27	22	20	20	D1		D
Y250X48.5	82~84	66	59	29	24	20.5	19	21	E3		E
S250x48.5	82~84	66	59	35	25	20	19	20	E2		C.E
250x52.5	64~100	76	64	35	30	23.5	26	24	E2		E
250x52.5K	68~88	78	68	35	31	23	28	20	D1		D.E
T250x52.5	76~106	78	73	35	30	23.5	25	24	D1		D.E
250x52.5W	74~106	88	83	42	38	23	23	20	G3		D.E
250x55.5	78~82	80	72	41	30	21	27	24	E3		A
250x72	46~86	76	56	40	24	30	26.5	18	E1		D
B250x72	39~56	63	50	37	24	28.5	22.5	10	E1		C.E
BC250x72	52~57	76	54	42	29	38	30	21	H3		A.B
BD250x72	52~57	63	51	37	23	29	22	10	K1		A.B
HMS250x72	29~60	76	56	40	24	30	26.5	18	H3		A.B
250x96	36~44	70	64	30	26	21	23.5	23	C1		C
Y250x96	36~41	70	60	31	25	20	19.5	22	J1		C
250x109	35~41	90	83	45	40	24.5	14	20	J1		C

Guide rail type

Product Details

High Tread Pattern Design

Strong grip, prevents slipping, performs

smoothly even in muddy conditions

Anti-cut Edge Design

Optimized anti-cut edge design reduces the

likelihood of track edge breakage

Closed Cord Structure

Internal reinforcement, prevents mud and

sand intrusion, extends service life

Caterpillar use the matters needing attention

1.Avoid quick starting or turning the machine on sharp edged or projected ground.

2.Keep the surface of rubber away from oil or grease. Wipe off immediately while it is oil stained.

3.Avoid corrosion between rubber tracks and other components of the machine, especially on its inner circumference.

4.Do not use heavily worn driving wheel because it may damage the iron teeth of the rubber track.

5.If the machine is unused for a long time, the rubber track should be dismantled and cleaned of mud and other useless materials and kept indoors from direct sunlight and raindrops.

6.As it is rubber-made products, the rubber track would work well under the temperature between -25℃—55℃. However, special rubber may meet the special needs of customers.

Attention Rubber Track Tension

1. Basically you have to apply the specified rubber track tension of the machine manufacture.

2. The following tolerance specified by the rubber track producer must be adhered.

For Rubber Track Width	Tolerance
180-250mm	10-20mm
260-300mm	20-25mm
320-400mm	25-30mm
420-500mm	30-35mm

Check the Rubber Track Tension

Practical approach:

1.Lift the machine off the floor (with the help of shied or bucket etc) so that the rubber track can sag freely.

2.Now measure the tolerance between the middle track roller and the rubber track. (Weekly Check!!!)

Application Cases

Covering pitches of 47-109mm, with flexible tooth counts of 29-106. Suitable for large construction machinery, providing excellent wear resistance and terrain adaptability.