Eriksen - 350-380mm Large Engineering Rubber Tracks

EasyTrack Solutions

Cooperative Supplier 11 Years

350-380mm Large Engineering Rubber Tracks

Suitable for ultra-heavy-duty equipment

Track Width：350mm, 370mm, 380mm
Track Pitch：54.5mm, 56mm, 73mm, 75.5mm, 86mm, 100mm, 107mm, 108mm
Customized Teeth No.：41teeth ~ 102teeth

USD 350-376

contact shop

Product Parameters

Technical Parameters

Spec.&Type	Customized Teeth	Technical Parameters							Pattern	Pattern Images	Guide rail type
Spec.&Type	Customized Teeth	A	B	C	D	E	F	H	Pattern	Pattern Images	Guide rail type
350x52.5	70~124	90	80	48	40	25	23	22	G1		C
350x54.5	84~102	95	87	44	40	23.5	22	20	J3		D
S350x54.5	84~102	90	84	48	42	23.5	22	19	J3		D
350x56	80~86	90	82	48	40	24	24	22	G1		D
350x56R	82~84	92	82	48	40	25.5	25.5	24	G1		D
Y350x73	66~80	109	104	51	48	24	24	25	J2		D
Y350x75.5	64~74	98	88	42	38	24	30	22	M2		D
350x100	48~70	110	86	64	46	45	50	26	L1		B
350x108	41~44	90	83	45	40	24.5	14	25	J1		C
350x109	41~44	92	83	45	40	86	20	25	J1		C
370x107	41~46	90	82	42	37	29	29	24	K2		D
B380x86SB	52	98	80	63	48	44	33	24	I2		F
B380x86Z	52	98	80	63	48	44	33	24	I1		F

Guide rail type

Product Details

High Tread Pattern Design

Strong grip, prevents slipping, performs

smoothly even in muddy conditions

Anti-cut Edge Design

Optimized anti-cut edge design reduces the

likelihood of track edge breakage

Closed Cord Structure

Internal reinforcement, prevents mud and

sand intrusion, extends service life

Caterpillar use the matters needing attention

1.Avoid quick starting or turning the machine on sharp edged or projected ground.

2.Keep the surface of rubber away from oil or grease. Wipe off immediately while it is oil stained.

3.Avoid corrosion between rubber tracks and other components of the machine, especially on its inner circumference.

4.Do not use heavily worn driving wheel because it may damage the iron teeth of the rubber track.

5.If the machine is unused for a long time, the rubber track should be dismantled and cleaned of mud and other useless materials and kept indoors from direct sunlight and raindrops.

6.As it is rubber-made products, the rubber track would work well under the temperature between -25℃—55℃. However, special rubber may meet the special needs of customers.

Attention Rubber Track Tension

1. Basically you have to apply the specified rubber track tension of the machine manufacture.

2. The following tolerance specified by the rubber track producer must be adhered.

For Rubber Track Width	Tolerance
180-250mm	10-20mm
260-300mm	20-25mm
320-400mm	25-30mm
420-500mm	30-35mm

Check the Rubber Track Tension

Practical approach:

1.Lift the machine off the floor (with the help of shied or bucket etc) so that the rubber track can sag freely.

2.Now measure the tolerance between the middle track roller and the rubber track. (Weekly Check!!!)

Application Cases

350-380mm large rubber tracks, pitch 54.5-108mm, teeth count 41-102 (customizable). Suitable for ultra-large engineering machinery, providing strong load-bearing capacity and durability.