Eriksen - 450mm Giant Engineering Rubber Tracks

EasyTrack Solutions

Cooperative Supplier 11 Years

450mm Giant Engineering Rubber Tracks

Suitable for ultra-large engineering equipment, anti-derailment heavy machinery tracks

Track Width：450mm
Track Pitch：71mm, 73.5mm, 76mm, 81.5mm, 83.5mm, 84mm, 86mm, 90mm, 100mm, 110mm, 163mm
Customized Teeth No.：36teeth ~ 104teeth

USD 800-840

contact shop

Product Parameters

Technical Parameters

Spec.&Type	Customized Teeth	Technical Parameters							Pattern	Pattern Images	Guide rail type
Spec.&Type	Customized Teeth	A	B	C	D	E	F	H	Pattern	Pattern Images	Guide rail type
450x71	76~92	112	102	48	42	32	24	28	G1		D
450x73.5	72~86	118	102	50	42	32	34	30	F1		C
450x76	80~92	120	110	58	49	30.5	30	26	G3		C
450x81.5	74~78	110	100	48	42	31.5	27.5	26	G2		C
J450x81.5	74~78	110	100	48	42	31.5	27.5	26	G2		C
T450x81.5	74~78	112	104	47	42	31.5	27.5	26	G2		C
450x81N	72~78	120	104	54	46	26	25	26	G1		C
450x81W	72~82	132	118	62	55	31	31	28	G1		C
450x83.5K	72~76	114	104	54	44	24	25	24	G1		C
450x83.5Y	72~74	116	102	52	41	23	26.5	25	M2		D
L450x90	60	85	54	52	40	46	30	28	I3		B
CL450x90	54~100	85	63	53	37	45.5	27.5	30	I3		B
450x84SB	53~56	102	81	65	44	45	33	26	I2		F
450x84MS	53~72	102	81	65	44	45	33	26	H2		F
BC450x86	52~63	97	80	65	48	45	34	25	H3		F
B450x86C	42~63	97	80	65	48	45	34	25	H3		F
B450x86D	52~63	97	80	65	48	45	34	25	K1		F
MS450x86	36~104	97	80	65	48	45	34	26	H2		F
SB450x86	50~63	97	80	65	48	45	34	26	I2		F
ZZ450x86	52~60	97	80	65	48	45	34	25	I1		F
450x100	48~50	104	80	64	46	51	45	28	K1		F
MS450x100	48~50	104	80	64	46	51	45	26	H2		F
SB450x100	48~50	104	80	64	46	51	45	26	I3		F
SL450x100	48~50	102	80	64	50	51	45	28	H3		F
T450x100KD	48~50	102	80	64	50	51	45	28	K1		F
TC450x100	48~50	102	80	64	50	51	45	28	H3		F
TD450x100	48~50	102	80	64	50	51	45	28	K1		F
MT450x100	80	112	85	65	45	57	54	35	L1		A.B
450x110	67~74	120	89	71	46	64	57	20	L1		F
450x110H	67~74	120	89	71	46	64	57	30	L1		F
MS450x110	50~88	120	89	71	46	64	57	30	H2		F
450x163	36~40	116	100	50	40	29	33	30	K2		D

Guide rail type

Product Details

High Tread Pattern Design

Strong grip, prevents slipping, performs

smoothly even in muddy conditions

Anti-cut Edge Design

Optimized anti-cut edge design reduces the

likelihood of track edge breakage

Closed Cord Structure

Internal reinforcement, prevents mud and

sand intrusion, extends service life

Caterpillar use the matters needing attention

1.Avoid quick starting or turning the machine on sharp edged or projected ground.

2.Keep the surface of rubber away from oil or grease. Wipe off immediately while it is oil stained.

3.Avoid corrosion between rubber tracks and other components of the machine, especially on its inner circumference.

4.Do not use heavily worn driving wheel because it may damage the iron teeth of the rubber track.

5.If the machine is unused for a long time, the rubber track should be dismantled and cleaned of mud and other useless materials and kept indoors from direct sunlight and raindrops.

6.As it is rubber-made products, the rubber track would work well under the temperature between -25℃—55℃. However, special rubber may meet the special needs of customers.

Attention Rubber Track Tension

1. Basically you have to apply the specified rubber track tension of the machine manufacture.

2. The following tolerance specified by the rubber track producer must be adhered.

For Rubber Track Width	Tolerance
180-250mm	10-20mm
260-300mm	20-25mm
320-400mm	25-30mm
420-500mm	30-35mm

Check the Rubber Track Tension

Practical approach:

1.Lift the machine off the floor (with the help of shied or bucket etc) so that the rubber track can sag freely.

2.Now measure the tolerance between the middle track roller and the rubber track. (Weekly Check!!!)

Application Cases

450mm giant rubber tracks, pitch 71-163mm, teeth count 36-104 (customizable). Suitable for the heaviest engineering machinery, providing ultimate stability and durability.