Eriksen - 485-800mm Extra-Giant Engineering Rubber Tracks

EasyTrack Solutions

Cooperative Supplier 11 Years

485-800mm Extra-Giant Engineering Rubber Tracks

Suitable for ultra-large engineering equipment, anti-derailment heavy machinery tracks

Track Width：485mm, 500mm, 600mm, 645mm, 650mm, 700mm, 750mm, 800mm
Track Pitch：71mm, 90mm, 92mm, 100mm, 110mm, 125mm, 150mm
Customized Teeth No.： 40teeth ~ 120teeth

USD 850-3,000

contact shop

Product Parameters

Technical Parameters

Spec.&Type	Customized Teeth	Technical Parameters							Pattern	Pattern Images	Guide rail type
Spec.&Type	Customized Teeth	A	B	C	D	E	F	H	Pattern	Pattern Images	Guide rail type
485x92	72	134	126	78	64	32.5	32	30	M2		D
500x71	72~86	104	95	66	45	24	25	60	-	-	D
YR500x90	70~90	93	78	64	47	52	36	30	I3		B
500x90	78~84	152	140	76	63	36	40	28	G1		C
500x100	58~90	112	85	65	45	57	54	45	L1		B
600x100	70~100	110	84	67	47	60	48	40	L1		B
650x110	80	102	75	62	46	71	50	50	L1		A.B
600x125	62~65	124	88	70	43	76	61	30	L1		B
600x150	46~70	165	125	105	62	70	63	55	L1		B
645x125	40~74	138	102	86	53	80	60	45	L1		B
700x100	80~98	112	90	70	50	75	59	40	L2		B
700x100	80~120	112	90	70	50	75	59	35	L1		B
750x150	66~78	170	126	116	62	92	65	45	L2		B
800x125	80	175	127	109	60	92	75	32	L1		B
800x150	66~80	143	102	86	62	75	54	40	L2		B

Guide rail type

Product Details

High Tread Pattern Design

Strong grip, prevents slipping, performs

smoothly even in muddy conditions

Anti-cut Edge Design

Optimized anti-cut edge design reduces the

likelihood of track edge breakage

Closed Cord Structure

Internal reinforcement, prevents mud and

sand intrusion, extends service life

Caterpillar use the matters needing attention

1.Avoid quick starting or turning the machine on sharp edged or projected ground.

2.Keep the surface of rubber away from oil or grease. Wipe off immediately while it is oil stained.

3.Avoid corrosion between rubber tracks and other components of the machine, especially on its inner circumference.

4.Do not use heavily worn driving wheel because it may damage the iron teeth of the rubber track.

5.If the machine is unused for a long time, the rubber track should be dismantled and cleaned of mud and other useless materials and kept indoors from direct sunlight and raindrops.

6.As it is rubber-made products, the rubber track would work well under the temperature between -25℃—55℃. However, special rubber may meet the special needs of customers.

Attention Rubber Track Tension

1. Basically you have to apply the specified rubber track tension of the machine manufacture.

2. The following tolerance specified by the rubber track producer must be adhered.

For Rubber Track Width	Tolerance
180-250mm	10-20mm
260-300mm	20-25mm
320-400mm	25-30mm
420-500mm	30-35mm

Check the Rubber Track Tension

Practical approach:

1.Lift the machine off the floor (with the help of shied or bucket etc) so that the rubber track can sag freely.

2.Now measure the tolerance between the middle track roller and the rubber track. (Weekly Check!!!)

Application Cases

Oversized rubber tracks ranging from 485-800mm in diameter, with pitches of 71-150mm and tooth counts of 40-120 (customizable). Suitable for the largest construction machinery, providing unparalleled stability and durability.