Product Description
Solar Charge Controller
All-New Upgraded Version Smart Safety
This HaloCore solar charge controller features a rugged ABS housing and a high-definition LCD display that shows key parameters such as battery voltage and charging status in real time. It supports automatic 12V/24V system recognition, includes dual USB fast-charging ports, and incorporates multiple protections against overcharging, over-discharging, short circuits, and reverse connections. It intelligently regulates the charging process from solar panels to batteries, ensuring battery longevity and system stability. Ideal for residential solar systems, outdoor camping, RV power supply, and similar applications.
LCD Display Adjustable Parameters Six Major Protections Dual USB Ports
Six Major Safety Protections
You need a safe and intelligent controller.
Overload
Protection
Overcharge
Reverse Polarity Protection
Protection
Undervoltage
Protection Overcurrent
Protection
Short Circuit
Protection
According to data statistics, the primary reason most batteries are damaged during charging without a solar controller is
The battery was damaged It was recycled prematurely It could even cause a fire
by overcharging
Functional Features
Extra-large LCD display with clear, intuitive readings
One-touch operation for effortless setup
Digital Display Area
Voltage Symbol
Solar Panel
Load Indicator
Charging Indicator Output Indicator
Battery Level Indicator
Menu Key Scroll Up Scroll Down/Manual
Menu key: Used to switch parameter display interfaces, or press and hold for 5 seconds to enter or exit parameter settings
Scroll up: In parameter settings, press once to increase the parameter by one level
Scroll Down: In parameter settings, press once to decrease the parameter by one level / Load switch
Fully charged battery automatically disconnects
Multiple intelligent safety protections
Load operation modes
24-hour constant on / Pure light control / Light control + delay
Extra-large LCD display
Digital readout for clearer visibility
LCD Display
Features an LCD display for clear, intuitive timing settings and one-touch operation.
Alloy Heat Sink Backplate
Thickened heat sink backplate enhances thermal performance. MOSFETs are positioned directly against the heat sink, enabling stable operation at ambient temperatures up to 60°C.
Operation Mode Settings
Touch-sensitive adjustment buttons enable one-touch completion of all settings.
Dual USB Charging Ports
Supports most USB-enabled devices on the market, including smartphones, tablets, and PSP gaming consoles.
ABS Engineering Plastic Housing
The housing utilizes ABS engineering plastic, offering high strength, impact resistance, high ignition point, anti-aging properties, and corrosion resistance. This ensures an extended effective service life and enhanced safety.
Battery Type
12V/24V auto-detection
Select as needed
Solar charge controller
Supports lead-acid, gel, and lithium batteries | Supports lead-acid and gel batteries |
12V/24V system voltage | 12V/24V system voltage |
Load mode = 24H/light control/time control | Load mode = 24H/light control/time control |
Adjustable parameters | Adjustable parameters |
Six major protections | Six major protections |
Battery type configurable
Solar smart charging
12V/24V
Lead-acid battery
Gel battery
12.6V
Lithium-ion battery
3 cells in series (3.7V/cell)
= 11.1V
14.6V
Lithium iron phosphate battery
4 cells in series (3.2V/cell)
= 12.8V
Connection Method
Connection Method
Standard Connection Sequence for Quick Installation
Battery
Solar Panel
DC Load
Inverter
Step 1:Connect the battery terminals to the controller as shown in the diagram (the controller will automatically detect the battery voltage).
Step 2:Connect the load terminals to the controller as shown in the diagram (be careful not to reverse the polarity).
Step 3:Connect the solar panel to the controller as shown in the diagram.
Note: Connect components strictly in the specified order. Failure to do so may damage the controller.
Display Interface/Parameter Settings
Browse Interface
Main Interface Float Charge Interface Press the menu button briefly to cycle
through interfaces and parameters.
Set Parameters
First, press the menu button briefly
Battery Type to switch to the desired interface Discharge Recovery Voltage
Then press and hold the menu button
for 5 seconds until the digits flash.Use the
up/down buttons to adjust the parameter
value. After adjustment, press and hold the
menu button for 5 seconds to exit settings.
Load Operating Mode Discharge Cut-off Voltage
Product parameters
Model | CL92-A |
System Voltage | 12V/24V Auto-Adaptive |
Rated Charge Current | 10A / 20A / 30A |
Rated Discharge Current | 10A / 10A / 10A |
Maximum PV Voltage | Maximum 23V for 12V batteries; Maximum 46V for 24V batteries |
Battery Type | B1 = Lead-acid battery (12V/24V auto-detection) B2 = Lithium-ion battery (Li-ion 3.3V=11.1V) B3 = Lithium iron phosphate battery (4 cells 3.2V=12.8V) |
Charge Cut-off Voltage | 14.4V(b1) / 12.6V(b2) / 14.6V(b3) |
Discharge Cut-off Voltage | 10.7V(b1) / 9V(b2) / 10V(b3) |
Discharge Recovery Voltage | 12.6V(b1) / 10.5V(b2) / 12V(b3) |
Light-controlled On Threshold | Solar Panel 8V (Light-controlled on with delay) |
Light-controlled Off Threshold | Solar Panel 8V (Light-controlled off with delay) |
USB Output | 2 USB Outputs, 5V/1A (Max) |
Standby Current | <10mA |
Operating Temperature | -35 ~ +60℃ |
Dimensions / Weight | 13.27.53cm / 165g |
Friendly Reminder: The battery voltage displayed on the screen may show slight discrepancies. Please refer to the actual reading.
Voltage marked in red applies only to 12V systems. For 24V systems, multiply by 2.
Model | CL92-B |
System Voltage | 12V/24V Auto-Adaptive |
Rated Charge Current | 10A / 20A / 30A |
Rated Discharge Current | 10A / 10A / 10A |
Maximum PV Voltage | Maximum 23V for 12V batteries; Maximum 46V for 24V batteries |
Battery Type | B1 Sealed / B2 Gel / B3 Open |
Boost Charge Voltage | 14.4V / 14.2V / 14.6V |
Float Charge Voltage | 13.7V (Default, adjustable) |
Discharge Cut-off Voltage | 10.7V (Default, adjustable) |
Discharge Recovery Voltage | 12.6V (default, adjustable) |
Charge Recovery Voltage | 13V |
Light-controlled On Threshold | Solar panel 8V (light-controlled on with delay) |
Light-controlled Off Threshold | Solar panel 8V (light-controlled off with delay) |
USB Output | 2 USB outputs, 5V/1A (max) |
Standby Current | <10mA |
Operating Temperature | -35 ~ +60℃ |
Dimensions / Weight | 13.27.53cm / 165g |
Friendly Reminder: The battery voltage displayed on the screen may show slight discrepancies. Please refer to the actual reading.
Voltage marked in red applies only to 12V systems. For 24V systems, multiply by 2.
Application wiring diagram
Solar-Powered Garden Lights Smart Home
Solar-Powered Light Boxes Solar Power Generation Systems
Wide Range of Applications
Suitable for solar power systems, solar street lights, smart homes, solar chargers, solar ventilation systems, solar light boxes, solar billboards, solar traffic warning lights, and other solar-powered systems.
