Eriksen - High speed power section/ducted thruster/underwater thruster/deep-sea thruster/customized thruster

DeepBlue Technology

GuaranTee Supplier 11 Years

Pump jet thruster with low roll moment, suitable for high-speed AUVs

Classification：

LW200-35 High-speed power sections

LW324-35 High-speed power sections

USD 128

output value: Monthly Output1000

contact shop

Selection Table for High Speed Power Section

Characteristics of high-speed power section

LW200-35 High-speed power sections

LW324-35 High-speed power sections

· Pump-jet propulsors with small rolling moments are applicable to high-speed AUVs. · Optical fiber outlets can be reserved.

· The motor electric control system supports rapid braking. · Folding rudder plates are customizable.

· An ultra-large voltage applicable range.

Thruster Parameters

LW200-35 High-speed power sections	Maximum speed At35 knot	Power/Voltage 30KW 500~600VDC	Control/RPM mode ①CAN ②RS485 ③RS422	Dimension Caliber 200mm Length 500mm	Optical fiber aperture Internal diameter 10~12mm
LW324-35 High-speed power sections	Maximum speed At35 knot	Power/Voltage 60KW 256~428VDC	Control/RPM mode ①CAN ②RS485 ③RS422	Dimension Caliber 324mm Length 1000mm	Optical fiber aperture Internal diameter 10~16mm
Note: Excluding connector dimensions, relevant dimensions can be found in the connector selection table.

Steering engine parameters

LW200-35 High-speed power sections
Torque/RPM/Angle 12-20Nm 90°/S ±30°	Steering engine voltage 24VDC	Control/RPM mode ①PWM ②CAN ③RS485/RS422	Auxiliary functions ①Electrified self-locking ②Power-off self-locking ③Reduction & torque (optional) ④“One for Four”control (optional)	Rudder plate dimension Height 140mm Width 210mm
LW324-35 High-speed power sections
Maximum speed At 35 knot	Power /Voltage 60KW 256-428VDC	Control/RPM mode ①PWM ②CAN ③RS485/RS422	Auxiliary functions ①Electrified self-locking ②Power-off self-locking ③Reduction & torque (optional) ④“One for Four”control (optional)	Rudder plate dimension Height 227mm Width 340mm
Note: The weight change of the oil filling compensation product is affected by the length of the oil pipe. For every 0.1 meter increase in the oil pipe, there is a weight gain of 45g in the air and 16g in the water.

LW200-35 High-speed power sections

LW324-35 High-speed power sections

Wiring Instruction

Product end connector interface External optional connector interface

Connector Options

MCBH6M/8M Miniature 6-pin/8-pin male socket
MCBH6F/8F Miniature 6-core/8-core female socket
MCBHRA6M/8M Miniature elbow 6-core/8-core male socket
MCBHRA6F/8F Miniature right angle 6-core/8-core female socket
MCBH12M/16M Miniature 12/16 pin male socket
MCBH12F/16F Miniature 12 core/16 core female socket
BH6M/8M Standard 6-pin/8-pin male socket
BH6F/8F Standard 6-pin/8-pin female socket
BH12M/16M Standard 12/16 pin male socket
BH12F/16F Standard 12/16 core female socket
MCPBOF6M/8M Miniature oil filled 8-core male socket
MCPBOF12M/16M Miniature oil filled 12 core/6-core male socket
PBOF6M/8M Standard oil filled 8-core male socket
PBOF6F/8F Standard oil filled 8-core female socket
5187K67/9579K69 Miniature oil filled 8/12/16 core oil pipe/clip
5187K67/9579K69 Standard 8-core oil tube/clip for oil filling
5187K69/9579K71 Standard oil filled 12/16 core oil pipe/clip
MCDLS-F Miniature locking cover
DLSA-F Standard locking cap
DLSB-F Standard locking cap

Company：eriksen

Email：deepblue@ttbridge.com

Tel：15617750813

Home