Product Description
TINS-17E-HB E-power Hybrid Version
The overall track structure of the chassis is designed in a parallelogram shape, with high ground clearance, strong crossing ability, long track grounding area, excellent stair climbing ability, and strong outdoor off-road ability. Both the front and rear tracks can wrap the vehicle body,which is more conducive to protecting the vehicle from damage and allowing it to walk on various terrains.
Large flat plate
on top (1830×1240 mm), can be equipped with guardrails and used as a transportation vehicle.
Tensioning wheel
Rubber tracks
Good ground adhesion, long track grounding area.
Shock absorption system
Christie and Matilda suspension combined with Christie shock absorption, providing excellent shock absorption system.
IP65 Waterproof
Remote controller
Support 3-speed (low/medium/high) speed regulation.
Night driving
Switching control of high and low beams allows for night driving operations.
Working mode
DC brushless Hall motor or servo motor drive+encoder, closed-loop control system, precise control.Precise control of steering angle, speed, and stroke. It can rotate in place or spiral as needed.
Driver
Overvoltage, overcurrent, undervoltage, overheating, short circuit protection。
Speed loop+displacement，loop+differential loop, precise speed regulation.
Lithium iron phosphate battery
It has the advantages of high working voltage, high energy density, long cycle life, good safety performance, low self discharge rate, and no memory effect.
Model Description
02 48V Range Extender Generator
03 LiFePO4 Battery
04 Current Sampling
05 Front-end Power Supply
06 Motor Driver
1.AC Expansion Port
3.Power Switch
4.E-Stop Switch
5.DC Expansion Port
6.Lighting 7.Charging Port
8.Battery Indicator
9.Outer Plate
10.Lifting Hook
11.Rear Cover
14.Generator Switch
15.Fuel Gauge
16.Fuel Filler
17.A/C Switch
18.Hydraulic Support Rod
Product parameters
Chassis Parameters | |||
Item | Data | Item | Data |
Dimensions | 2000×1300×710 mm | Drive Wheel Diameter | 260 mm |
Max Motor Power | 8 kW × 2 @48V brake; Max 11 kW | Rated Motor Speed | 3000 r/min |
Motor Voltage | AC 220V | Max Track Span | 1530 mm |
Track Width | 230 mm | Gross Weight | 700 kg (exclude battery) |
Reduction Ratio | 1:30 | Output Torque | 2×726 Nm |
Payload | 800 kg | Max Speed | 7.2 km/h |
Ground Clearance | 220 mm | Obstacle Clearance | 400 mm |
Remote Range | 300–400 m (open area) | Reserved Remote Channels | 5T |
Standby Power | ≤50 W | Max Operating Current | 44 A |
Protection | IP65 | Encoder Resolution | 3000 lines |
Work environment | Altitude below 5000M, relative humidity: 0% -90% RH, with condensation (25 ℃) | Working temperature | -10-60℃ |
Endurance (full fuel/battery) | 8–10 h | ||
Battery Parameters | |||
Item | Data | Item | Data |
Battery Compartment Dimensions | 720×700×400 mm | Cell Type | LiFePO₄ (Lithium Iron Phosphate) |
Battery Voltage | DC 48V | Max Battery Capacity | 120 Ah |
Battery Endurance | 1–2 hours | Continuous Discharge Current | 300 A |
Charge Cut-off Voltage | 54.6V ± 0.2V | Discharge Cut-off Voltage | 48V |
Storage Temperature | 0–35°C | Operating Temperature | -10–60°C |
Battery Dimensions | 530×260×240 mm | Battery Weight | 50 kg |
Charger Parameters | |||
Item | Data | Item | Data |
Charger Input Voltage | AC 220V 50Hz / AC 110V 60Hz | Charger Max Output Voltage | 58.4V DC |
Charger Max Output Current | 40A DC | Charger Weight | 4 kg |
Generator Parameters | |||
Item | Data | Item | Data |
Max Power | 3000–6000 W | Rated Speed | 3000 rpm |
Bore × Stroke | 70×56 mm | Displacement | 208 / 212 / 225 cc |
Fuel Consumption | ≤450 g/(kW·h) | Compression Ratio | 8.2:1 |
Fuel Tank Capacity | 20 L | - | - |
Air Conditioner Parameters | |||
Item | Data | Item | Data |
Rated Voltage | DC 48V | Power | 400–900 W |
Cooling Capacity | 2000–2400 W | Heating Power | 1200 W |
Rated Current | 16A | Refrigerant | R134A |
Refrigerant Charge | 380g | Unit Weight | 20 kg |
Service
FAQ：
