Product description
Q Series 4-in-1 Brushless ESC
Characteristics and parameters
Series Q BLS_15A 4-in-1 Electronic Speed Controller
| Net weight of product: 5.3g |
ESC parameters | Product Features |
Size: 32 * 30mm (20mm-20mm mounting hole) | 1. The PCB adopts high-end 4-layer 2oz thick copper foil, using high-end resin plug hole PCB production technology, dual pad design, stronger overcurrent capability, and good heat dissipation. |
Electric tuning firmware: G_H20-Rev.16.7-Multi | |
Input voltage: 2S-4S Lipo | |
Continuous current: 15A | |
Peak current: 25A | |
Protocol support：PWM, Oneshot125，Oneshot42,Multishot,Dshot150,Dshot300，Dshot600 | |
High quality hardware |
|
EMF8BB21F16G main control chip, dual pad design, operating frequency up to 48MHz. Imported MOSFETs, triple I C drivers, and high-quality Gong ceramic capacitors from abroad. High end PCB production technology uses metalized edge wrapping on all solder pads to prevent them from falling off during use; 2 ounces of copper thickness, 4 layers of board, greatly reducing heat generation and increasing efficiency. | |
Software: PWM,Damped Light | |
Hardware PWM driven motor, with low noise and smoother throttle response. Damped Light technology, regenerative braking function, makes motor deceleration more flexible and effective, and control more precise; Active continuation technology allows the battery to recover its power and extend the endurance time. |
Series Q BLS_25A 4-in-1 Electronic Speed Controller
| Net weight of product: 5.3g |
ESC parameters | Product Features |
Size: 32 * 30mm (20mm-20mm mounting hole) | 1. The PCB adopts high-end 4-layer 2oz thick copper foil, using high-end resin plug hole PCB production technology, dual pad design, stronger overcurrent capability, and good heat dissipation. |
Electric tuning firmware: G_H20-Rev.16.7-Multi | |
Input voltage: 2S-5S Lipo | |
Continuous current: 25A | |
Peak current: 30A | |
Protocol support：PWM, Oneshot125，Oneshot42,Multishot,Dshot150,Dshot300，Dshot600 | |
High quality hardware |
|
EMF8BB21F16G main control chip, dual pad design, operating frequency up to 48MHz. Imported MOSFETs, triple IC drivers, and high-quality Gong ceramic capacitors from abroad. High end PCB production technology uses metalized edge wrapping on all solder pads to prevent them from falling off during use; 2 ounces of copper thickness, 4 layers of board, greatly reducing heat generation and increasing efficiency. | |
Software: PWM,Damped Light | |
Hardware PWM driven motor, with low noise and smoother throttle response. Damped Light technology, regenerative braking function, makes motor deceleration more flexible and effective, and control more precise; Active continuation technology allows the battery to recover its power and extend the endurance time. |
Series Q 8B 35A 4-in-1 Electronic Speed Controller
| Net weight of product: 6g |
ESC parameters | Product Features |
Size: 31 * 30mm (20mm-20mm mounting hole) | 1. The PCB adopts high-end 6-layer 2oz thick copper foil, using high-end resin plug hole PCB production technology, dual pad design, stronger overcurrent capability, and good heat dissipation. |
Electric tuning firmware: G_H20-Rev.16.7-Multi | |
Input voltage: 2S-6S Lipo | |
Ampere ratio: 300 | |
Continuous current: 25A | |
Peak current: 40A | |
Protocol support：PWM, Oneshot125，Oneshot42,Multishot,Dshot150,Dshot300，Dshot600 | |
High quality hardware |
|
Japan imported MOS, three in one IC driver FD6288Q driver, imported high-quality Murata capacitors, using high-end resin plug hole PCB production technology, dual pad design, with metalized edges on all pads to prevent pad detachment during use; 2 ounces of copper thickness, 6 layers of board, greatly reducing heat generation and increasing efficiency. | |
Software: PWM,Damped Light | |
Hardware PWM driven motor, with low noise and smoother throttle response. Damped Light technology, regenerative braking function, makes motor deceleration more flexible and effective, and control more precise; Active continuation technology allows the battery to recover its power and extend the endurance time. |
Series Q 3B 40A 4-in-1 Electronic Speed Controller
| Net weight of product: 6g |
ESC parameters | Product Features |
Size: 44 * 44mm (20mm-20mm mounting hole) | 1. The PCB adopts high-end 6-layer 2oz thick copper foil, using high-end resin plug hole PCB production technology, dual pad design, stronger overcurrent capability, and good heat dissipation. |
Electric tuning firmware: HAKRC-40-K42-Multi_32/8.Hex | |
Input voltage: 2S-6S Lipo | |
Ampere ratio: 300 | |
Continuous current: 40A | |
Peak current: 45A | |
Protocol support：PWM, Oneshot125，Oneshot42,Multishot,Dshot150,Dshot300，Dshot600 | |
High quality hardware |
|
The AT32F421 main control chip operates at a frequency of up to 128MHz. Three in one IC driver FD6288Q driver, imported high-quality Murata capacitors, using high-end resin plug hole PCB production technology, solder pads are all metalized with edges, allowing you to avoid solder pad detachment during use; 2 ounces of copper thickness, 6 layers of board, greatly reducing heat generation and increasing efficiency. | |
Software: PWM,Damped Light | |
Hardware PWM driven motor, with low noise and smoother throttle response. Damped Light technology, regenerative braking function, makes motor deceleration more flexible and effective, and control more precise; Active continuation technology allows the battery to recover its power and extend the endurance time. |
Series Q 3320 60A/65A 4-in-1 Electronic Speed Controller
| Net weight of product: 11g |
ESC parameters | Product Features |
Size: 32 * 42mm (20mm-20mm mounting hole) | 1. The PCB adopts high-end 8-layer 2oz thick copper foil, using high-end resin plug hole PCB production technology, dual pad design, stronger overcurrent capability, and good heat dissipation. |
Electric tuning firmware: HAKRC_AT4GMulti_32.9 Hex | |
Input voltage: 2S-8S Lipo | |
Ampere ratio: 160 | |
Continuous current: 60A/65A | |
Peak current: 70A/75A | |
Protocol support：PWM, Oneshot125，Oneshot42,Multishot,Dshot150,Dshot300，Dshot600 | |
High quality hardware |
|
The AT32F421 main control chip operates at a frequency of up to 128MHz. Imported MOS from Japan, three in one IC driver FD6288Q driver, imported high-quality Murata capacitors, using high-end resin plug hole PCB production technology, dual pad design with metalized edges to prevent pad detachment during use; 2 ounces of copper thickness, 8 layers of board, greatly reducing heat and increasing efficiency. | |
Software: PWM,Damped Light | |
Hardware PWM driven motor, with low noise and smoother throttle response. Damped Light technology, regenerative braking function, makes motor deceleration more flexible and effective, and control more precise; Active continuation technology allows the battery to recover its power and extend the endurance time. |
Series Q 3B 60A 4-in-1 Electronic Speed Controller
| Net weight of product: 15g |
ESC parameters | Product Features |
Size: 42.5 * 45mm (30.5mm -30.5mm mounting hole) | 1. The PCB adopts high-end 6-layer 2oz thick copper foil, using high-end resin plug hole PCB production technology, dual pad design, stronger overcurrent capability, and good heat dissipation. |
Electric tuning firmware: HAKRC-60-K42-MuIti32.Hex | |
Input voltage: 2S-6S Lipo | |
Ampere ratio: 160 | |
Continuous current: 60A | |
Peak current: 70A | |
Protocol support：PWM, Oneshot125，Oneshot42,Multishot,Dshot150,Dshot300，Dshot600 | |
High quality hardware |
|
The AT32F421 main control chip operates at a frequency of up to 128MHz. Three in one IC driver FD6288Q driver, imported high-quality Murata capacitors, using high-end resin plug hole PCB production technology, dual pad design with metalized edges to prevent pad detachment during use; 2 ounces of copper thickness, 6 layers of board, greatly reducing heat and increasing efficiency. | |
Software: PWM,Damped Light | |
Hardware PWM driven motor, with low noise and smoother throttle response. Damped Light technology, regenerative braking function, makes motor deceleration more flexible and effective, and control more precise; Active continuation technology allows the battery to recover its power and extend the endurance time. |
Series Q 3B 65A 4-in-1 Electronic Speed Controller
| Net weight of product: 15g |
ESC parameters | Product Features |
Size: 42.5 * 45mm (30.5mm -30.5mm mounting hole) | 1. The PCB adopts high-end 6-layer 2oz thick copper foil, using high-end resin plug hole PCB production technology, dual pad design, stronger overcurrent capability, and good heat dissipation. |
Electric tuning firmware: HAKRC-60-K42-MuIti32.Hex | |
Input voltage: 2S-6S Lipo | |
Ampere ratio: 160 | |
Continuous current: 65A | |
Peak current: 70A | |
Protocol support：PWM, Oneshot125，Oneshot42,Multishot,Dshot150,Dshot300，Dshot600 | |
High quality hardware |
|
The AT32F421 main control chip operates at a frequency of up to 128MHz. Three in one IC driver FD6288Q driver, imported high-quality Murata capacitors, using high-end resin plug hole PCB production technology, dual pad design with metalized edges to prevent pad detachment during use; 3 ounces of copper thickness, 6 layers of board, greatly reducing heat and increasing efficiency. | |
Software: PWM,Damped Light | |
Hardware PWM driven motor, with low noise and smoother throttle response. Damped Light technology, regenerative braking function, makes motor deceleration more flexible and effective, and control more precise; Active continuation technology allows the battery to recover its power and extend the endurance time. |
